EMC New Products
| Type | Features | ||
|---|---|---|---|
 | CDG 7000-200 | 200 W RF power amplifier, Frequency range: 100 kHz – 400 MHz BCI tests up to 500 mA closed loop NEW: Extended frequency ranges for the CDG 7000-25 and CDG 7000-75 | more info |
 | CDG 7000-200-4 | CDG 7000-200-4 Amplifier, Frequency range 4 kHz – 1 MHz Accessory for the CDG 7000-200 | more info |
 | 63 A 125 A 200 A | 2 - 3 phase CDN for Surge, Burst, Ring Wave, Voltage up to 1500 V DC, Voltage AC up to 1000 Vrms (1-phase or optional 3-phase) FP-COMB 63/1500-1 63 A current/phase FP-COMB 125/1500-1 125 A current/phase FP-COMB 200/1500-1 200 A current/phase | more info |
 | MGA CT EI192 | Coupling transformer, MIL-STD-461 and DO-160, high saturation flux density, low leakage impedance | more info |
 | MGA CT B-50 MGA CT B-100 | MGA CT B-50/100 - compact solution for immunity testing, both for the CS101 MIL-STD-461 as well as for the DO-160 | more info |
 | Test-Setup | Test Setup for medical devices: IEC 60601-1-2 Ed. 4.1 IEC 61000-4-39 | more info |
 | AXOS 5 | The Haefely multifunctional device covers the following standards: IEC/EN 61000-4-4 Burst IEC/EN 61000-4-5 Surge IEC/EN 61000-4-9 (with MSURGE-A) IEC/EN 61000-4-11 / -29 (with DIP 116) and integrated single-phase CDN | more info |
 | AXOS 8 | Several stand-alone test systems in a single economical solution. A multifunctional device from Haefely for the standards: IEC/EN 61000-4-4 Burst IEC/EN 61000-4-5 Surge IEC/EN 61000-4-5 & ITU (mit TW8) IEC/EN 61000-4-9 (mit MSURGE-A) IEC/EN 61000-4-11 / -29 (mit DIP 116) IEC/EN 61000-4-12, ANSI/IEEE C62.41 and integrated single-phase CDN | more info |
 | PSURGE 30.2 | Modular surge test system for up to 4 pulse shapes from Haefely: - 4 interchangeable pulse modules - up to 30 kV impulse voltage and up to 30 kA impulse current - Automatic polarity switching - monitoring of peak voltage and peak current - integrated large test cabin | more info |
 | FP-COMB 32 | CDN for AXOS 5/8 from Haefely | more info |