Accessories Immunity RF | 10 kHz - 400 MHz | IEC 61000-4-6
Type | Feature | ||
---|---|---|---|
![]() | CDN xxx CDG A 31xx | Coupling / decoupling networks (CDNs), Calibration adapters for CDNs, 50 /150 Ohm matching adapter and mouting plate | more info |
![]() | CDN EMCL-20 | EM Clamp for cable diameters < 20 mm | more info |
![]() | CDN EMCL-35 | EM Clamp for cable diameters < 35 mm | more info |
![]() | CDN ABCL-20 | Decoupling clamp for cable diameter < 20 mm | more info |
![]() | CDN ABCL-35 | Decoupling clamp for cable diameter < 35 mm | more info |
![]() | CDN EMCL-NW_10 | Matching network 10 kHz - 150 kHz for extending the range from CDN EMCL -20 to 10 kHz | more info |
![]() | CDN BCI-P1 CDN BCI-P1_MT-1 | Clamp bulk current injection (BCI) with calibration set (For the current edition of ISO 11452-4, 100 kHz - 400 MHz the MT-1 is required as an accessory.) | more info |
![]() | CDG CMP-45 | Current monitoring probe, foldable, with calibration set | more info |
![]() | CDG CMP-46 | Current monitoring probe | more info |
![]() | CDG 7006-20W | 6 dB Attenuator, 20 W | more info |
![]() | CDG 7006-100W | 6 dB Attenuator, 100 W | more info |
![]() | CDG 7006A-100W | 6 dB Attenuator, 100 W | more info |
![]() | CDG 7020-20W | 20 dB Attenuator, 20 W | more info |
![]() | CDG A 50-10W | Termination | more info |
![]() | SESD 270 | Reference ground plane, HCP – Horizontal Coupling Plane | more info |
![]() | HELIA 7 | Control software also available for BCI tests | more info |
Accessories Immunity, DC - 300 kHz | IEC 61000-4-16 / -19
Type | Feature | ||
---|---|---|---|
![]() | CN 19 U-I | Coupling network with integrated current transformer (IEC 61000-4-19) | more info |
![]() | CN 19 U CN 19 I | Coupling network Current transformer (IEC 61000-4-19) | more info |
![]() | CN 1241 xx | Coupling networks, switchable (IEC 61000-4-16) | more info |
![]() | CN xxx | Coupling networks (IEC 61000-4-16) | more info |
![]() | CN 60255-C CN 60255-D | Coupling network for common / differential mode tests (IEC 60255-26) | more info |
![]() | IT-06 IT-16 IT-20 | Isolation Transformer (IEC 61000-4-16, MIL STD 461) | more info |
![]() | CN19 ZDIFF 1 Ohm | Current Shunt (IEC 61000-4-19) | more info |
![]() | CN19 Balun | Balun-Set: Impedance transformers for differential voltage tests - for tests with CN 19-U ((IEC / EN 61000-4-19) | more info |