CDN for Surge, Ring Wave Tests | FP-SURGE 100M2
IEC / EN 61000-4-5
IEC / EN 61000-4-12
ANSI C62.41 & C62.45
The FP-SURGE 100M2 coupling/decoupling network with manual coupling path switching is fully compliant with the standard requirements of IEC/EN 61000-4-5, IEC/EN 61000-4-12, and tests to meet the surge requirements of ANSI/IEEE C62.41 and C62.45. It is specifically designed to meet and exceed the requirements of IEC, EN, and ANSI tests for power line applications.
ANSI standards C62.41 and C62.45 contain essentially the same information as the IEC standards, but are based on U.S. experience with AC power lines. No requirements are included for voltage drop across decoupling reactors.
With a selector switch, the FP-SURGE 100M2 can handle different current ranges (0 - 25 A, 25 - 60 A and 60 - 100 A). The FP-SURGE 100M2 EUT output has specially designed high voltage terminals that provide increased personal protection with respect to the high voltage pulse.
- Impulse voltage: max. 8 kV
- Impulse current: max. 4 kA
- Max. voltage AC 50 / 60 Hz:
690 V (phase-phase), 400 V (phase-neutral) - Current ranges AC / DC for IEC 61000-4-5 Ed. 3:
0 - 25 A, 25 - 60 A, 60 - 100 A - Current ranges AC / DC for IEC 61000-4-5 Ed. 3 and ANSI C62.41: 0 - 100 A
- Weight: 220 kg (485 lb)
- Phase angle synchronization for each coupling path
- Synchronization Path Switching – The FP-SURGE 100M2 synchronizes impulses with the selected coupling path.
- Manual selection of coupling elements, coupling elements and coupling path
- Full 100 A Capability – Both AC and DC loads up to 100A per phase can be connected through the FP-SURGE 100M2.
- Sturdy and Reliable – Careful component selection ensures that the FP-SURGE 100M2 will continue to operate under the most strenuous testing regime.
- Upgrade Possible – Previously delivered FP-SURGE 100M couplers can be upgraded in our factory.
- Safe and easy – Interlocked high voltage connections allow safe and easy handling.