Selection generators
EMC Generators / Measurement Systems
IEC / EN 61000-4-4
IEC / EN 61000-4-4
IEC / EN 61000-4-5
IEC / EN 61000-4-5
IEC/EN 61000-4-5
IEC/EN 61010
IEC/EN 60050-1
IEC/EN 60664
IEC/EN 61010
IEC/EN 60050-1
IEC/EN 60664
IEC / EN 61000-4-6
IEC 60601-1-2 Ed. 4.1 / IEC 61000-4-39
MIL-STD-461 CS114
ISO 11452-4
IEC 61326-3-2
NAMUR
IEC 60601-1-2 Ed. 4.1 / IEC 61000-4-39
MIL-STD-461 CS114
ISO 11452-4
IEC 61326-3-2
NAMUR
IEC / EN 61000-4-11
IEC / EN 61000-4-29
IEC / EN 61000-4-29
IEC / EN 61000-4-16
IEC / EN 61000-4-19
IEC 60255
IEC / EN 61000-4-19
IEC 60255
IEC / EN 61000-4-16
FNN Guide, chapter 3.7.1
IEC / EN 61000-4-4
IEC / EN 61000-4-5
IEC / EN 61000-4-9 (+ MSurge-A)
IEC / EN 61000-4-11 /-29 (+ DIP 116)
IEC / EN 61000-4-5
IEC / EN 61000-4-9 (+ MSurge-A)
IEC / EN 61000-4-11 /-29 (+ DIP 116)
IEC / EN 61000-4-4
IEC / EN 61000-4-5
IEC / EN 61000-4-5 & ITU Telekom Wave (+ TW8)
IEC / EN 61000-4-9 (+ MSurge-A)
IEC / EN 61000-4-11 / -29 (+ DIP 116)
IEC / EN 61000-4-12 & ANSI / IEEE C 62.41 Ring Wave
IEC / EN 61000-4-5
IEC / EN 61000-4-5 & ITU Telekom Wave (+ TW8)
IEC / EN 61000-4-9 (+ MSurge-A)
IEC / EN 61000-4-11 / -29 (+ DIP 116)
IEC / EN 61000-4-12 & ANSI / IEEE C 62.41 Ring Wave
Calibrations
Regular calibrations are necessary to determine whether the defined technical parameters of a test and measuring instrument are within the standard. In general, we distinguish between the following types of calibrations:
Factory calibration
(traceable to ISO 9001 and following to ISO 17025)
Accredited calibration
(DAkkS, ISO 17025)
Many devices of Schlöder GmbH are delivered with factory calibration and calibration certificate as standard. On request we can offer accredited calibrations for almost any of our instruments and accessories.